Component Layout; Mechanical Components - Ricoh 5510L Service Manual

14 June, 2002

1.3 COMPONENT LAYOUT

1.3.1 MECHANICAL COMPONENTS

1
18
17
16
15
14
13
12
11
No Name
MDF (Manual Document
1
Feeder)
2 R0 Roller
3 R1 Roller
4 Document Feed Roller
5 Reverse Roller
6 Pick-up Roller
7 R2 Roller
8 Exit Roller
9 Fusing Pressure Roller
10 Laser Unit
11 Paper Pick-up Roller
12 Paper Feed Roller
13 Bypass Unit
14 Registration Roller
15 Transfer Roller
16 AIO (All-in-One) Cartridge
17 OPC Drum
18 Hot Roller
2 4 5
3
Feeds non-standard size documents.
Feeds the document through the scanner.
Feeds the document through the scanner.
Feeds the document into the scanner.
Allows one page into the scanner.
Picks up pages of the document from the document table one at a
time.
Feeds the document through the stamp to the exit
Feeds the document out to the document tray.
Applies pressure to the paper during the fusing process.
Consists of the LDDR (Laser Diode Driver), focusing lens,
hexagonal mirror motor, and other laser optic components.
Picks up the top sheet of paper from the stack in the tray, and
feeds it into the printer.
Feeds the paper towards the registration roller.
100-sheet optional paper feed unit.
Carries out the registration process.
Transfers toner from the drum to the paper.
Consists of the toner cartridge, cleaning unit, used toner tank,
charge brush roller, development roller and OPC drum.
The latent image is written to this organic photoconductor drum.
Heat from this roller fuses the toner to the copy paper.
Spec-7
COMPONENT LAYOUT
7 8
6
Description
9
10
H310V003.WMF