Garmin vivoactive HR Owners Man page 36

2 Select
3 Select Bike.
4 When using optional ANT+ sensors, wait
while the device connects to the sensors.
5 Go outside, and wait while the device
locates satellites.
6 Select
History is recorded only while the timer is
running.
7 Start your activity.
8 Swipe up or down to scroll through data
screens.
9 After you complete your activity, select
> to save the activity.
Walking
Going for a Walk
Before you can use an ANT+ sensor for your
walk, you must pair the sensor with your device
(Pairing ANT+ Sensors, page 64)
1 Put on your ANT+ sensors, such as a foot
pod or heart rate monitor (optional).
2 Select
3 Select Walk.
4 When using optional ANT+ sensors, wait
while the device connects to the sensors.
5 Go outside, and wait while the device
locates satellites.
6 Select
History is recorded only while the timer is
running.
vívoactive HR
®
.
to start the timer.
.
to start the timer.
.
35
EN