Power Specifications; Storage Controller Specifications; Drive Specifications; Hard Drives - Dell PowerEdge R330 Owner's Manual

Power specifications

Power supply Specification
unit
Power rating per 350 W (Platinum) (100–240 V AC, 50/60 Hz, 4.8 A–2.4 A)
power supply unit
Heat dissipation 1357.1 BTU/hr
Voltage 100-240 V AC, autoranging, 50/60 Hz

Storage controller specifications

Storage Specification
controller
Storage controller PERC H730, PERC H330, PERC H830, PERC S130.
type

Drive specifications

Hard drives

The PowerEdge R330 system supports SAS, SATA, Nearline SAS hard drives and Solid State Drives (SSDs).
Drives Specification
Eight hard drive Up to eight 2.5-inch, hot swappable SAS, SATA, SATA SSD, or Nearline SAS hard drives.
systems
Four hard drive Up to four 3.5-inch cabled hard drives, or
systems
Up to four 3.5-inch hot swappable SATA, or Nearline SAS hard drives, or
Up to four 2.5-inch hot swappable SATA, or Nearline SAS hard drives in 3.5-inch adapters

Optical drive

The PowerEdge R330 system supports one optional slim SATA DVD-ROM drive or DVD+/-RW drive.
26
NOTE: Heat dissipation is calculated by using the power supply wattage rating.
NOTE: This system is also designed to be connected to IT power systems with a phase-to-phase
voltage not exceeding 230 V.
NOTE: Your system supports software RAID S130 and a PERC card.
For more information on software RAID, see the Dell PowerEdge RAID Controller (PERC)
documentation at Dell.com/storagecontrollermanuals.