Dell PowerEdge R330 Owner's Manual page 13

Item Indicator, Button, or
Connector
4 USB management port/iDRAC
managed USB port
5 USB connector
6 Optical drive slot
7 LCD menu buttons
8 Information tag
9 LCD panel
10 Video connector
11 Hard drive slots
Figure 4. Front panel features and indicators — four 3.5-inch cabled hard drive chassis
Table 3. Front panel features and indicators — four 3.5-inch cabled hard drive chassis
Item Indicator, Button, or
Connector
1 Power-on indicator, power
button
Icon Description
the system status indicator on the back flash until one of the
buttons is pressed again.
Press the system identification button to turn the system ID on
or off.
If the system stops responding during POST, press and hold the
system ID button for more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup), press and
hold the button for more than 15 seconds.
Functions as a regular USB port or provide access to the iDRAC
Direct features. For more information, see the iDRAC User's
Guide at Dell.com/idracmanuals.
Enables you to connect USB devices to the system. The port is
USB 2.0-compliant.
Enables you to install an optional slim SATA DVD-ROM drive or
DVD+/-RW drive.
Enable you to navigate the control panel LCD menu.
Contains system information such as service tag, NIC, MAC
address for your reference. The information tag is a slide-out
label panel.
Displays system ID, status information, and system error
messages. See
Enables you to connect a VGA display to the system.
Enables you to install up to eight 2.5-inch hot swappable hard
drives.
Icon Description
Enables you to know the power status of the system. The
power-on indicator glows when the system power is on. The
power button controls the power supply output to the system.
LCD panel features.
13