Removing The Cooling Fan Blank - Dell PowerEdge R330 Owner's Manual

Removing the cooling fan blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: The procedure for removing each cooling fan blank is identical.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Press the release tabs and push the cooling fan blank to disengage it from the cooling fan bracket.
2. Lift the cooling fan blank out of the cooling fan bracket.
Figure 48. Removing a cooling fan blank
1. cooling fan blank (2)
3. tab
Next steps
1. Install the cooling fan.
2. Follow the procedure listed in the After working inside your system section.
Related links
Installing a cooling fan
Installing the cooling fan blank
86
2. cooling fan bracket
4. release tab (2)