Indicator Codes For Redundant Power Supply Unit - Dell PowerEdge R330 Owner's Manual

Table 9. iDRAC Direct LED indicators
Convention iDRAC Direct LED
indicator pattern
A Green
B Flashing green
C Green and turns off
D Not lit
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):
Table 10. iDRAC Direct LED indicator patterns
iDRAC Direct LED
indicator pattern
Solid green for two
seconds
Flashing green (on for two
seconds and off for two
seconds)
Turns off

Indicator codes for redundant power supply unit

Each AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is present or whether a power
fault has occurred.
Figure 10. AC PSU status indicator
1. AC PSU status indicator or handle
20
Condition
Turns green for a minimum of two seconds to indicate the start and end of a file
transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is complete.
Condition
Indicates that the laptop is connected.
Indicates that the laptop connected is recognized.
Indicates that the laptop is unplugged.