Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell Storage NX3330 Owner's Manual

Figure 47. Installing the TPM
1 rivet slot on the system board
3 TPM
Next steps
1 Install the system board.
2 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
System board connectors
Before working inside your system
After working inside your system

Initializing the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see http://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Initializing the TPM for TXT users

1 While booting your system, press F2 to enter System Setup.
2 On the System Setup Main Menu screen, click System BIOS → System Security Settings.
3 From the TPM Security option, select On with Pre-boot Measurements.
4 From the TPM Command option, select Activate.
5 Save the settings.
6 Restart your system.
7 Enter System Setup again.
8 On the System Setup Main Menu screen, click System BIOS → System Security Settings.
9 From the Intel TXT option, select On.
108 Installing and removing system components
2 plastic rivet
4 TPM connector