Installing Cooling Fan - Dell Storage NX3330 Owner's Manual

NOTE: The procedure for removing each fan is identical.
Steps
Hold the fan and lift it out of the system.
Next steps
Figure 22. Removing and installing a cooling fan
1 cooling fans (7)
Related links
Safety instructions
Before working inside your system

Installing cooling fan

Prerequisites
1 Ensure that you read the Safety instructions section in this document.
2 Follow the procedure listed in the Before working inside your system section in this document.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
NOTE: Your system supports seven hot-swappable cooling fans.
Steps
1 Align the plug at the base of the cooling fan with the connector on the system board.
2 Slide the cooling fan into the securing slots until the tabs lock into place.
Next steps
Follow the procedure listed in the After working inside your system section in this document.
Related links
Safety instructions
Before working inside your system
After working inside your system
2 cooling fan connectors (7)
Installing and removing system components 73