Inside System - Dell Storage NX3330 Owner's Manual

The system cover slides forward and the slots on the system cover engage with the tabs on the chassis. The system cover latch locks
into place when the system cover is completely engaged with the tabs on the chassis.
3 Rotate the latch release lock clockwise to the locked position.
Next steps
1 If removed, install the front bezel.
2 Reconnect the peripherals and connect the system to the electrical outlet.
3 Turn on the system, including any attached peripherals.
4 Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system

Inside system

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
NOTE: Components that are hot-swappable are marked orange and touch points on the components are marked blue.
54 Installing and removing system components