System Messages; Warning Messages; Diagnostic Messages; Alert Messages - Dell Storage NX3330 Owner's Manual

Table of Contents

If the problem persists, see the Getting help section.

System messages

For a list of event and error messages generated by the system firmware and agents that monitor system components, see the Dell Event

and Error Messages Reference Guide at Dell.com/openmanagemanuals > OpenManage software.

A warning message alerts you to a possible problem and prompts you to respond before the system continues a task. For example, before

you format a hard drive, a message warns you that you may lose all data on the hard drive. Warning messages usually interrupt the task and

need you to respond by typing y (yes) or n (no).

NOTE:

Warning messages are generated by either the application or the operating system. For more information, see the

documentation that shipped with the operating system or application.

The system diagnostic utility generates messages if there are errors detected when you run diagnostic tests on your system. For more

information about system diagnostics, see the Using system diagnostics section.

The systems management software generates alert messages for your system. Alert messages include information, status, warning, and

failure messages for drive, temperature, fan, and power conditions. For more information, see the systems management software

documentation links listed in the Documentation resources section of this manual.

Nx3330