Re-Enabling Tpm For Bitlocker Users; Re-Enabling Tpm For Txt Users - Dell NX3230 Owner's Manual

Figure 56. Installing the TPM
1. TPM
3. slot on the TPM connector
5. slot on the system board

Re-enabling TPM for BitLocker users

Initialize the TPM.
For more information on initializing the TPM, see http://technet.microsoft.com/en-us/library/
cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Re-enabling TPM for TXT users

1. While booting your system, press F2 to open System Setup page.
2. In the System Setup Main Menu, click System BIOS → System Security Settings.
3. In the TPM Security option, select On with Pre-boot Measurements.
4. In the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Open the System Setup page again.
8. In the System Setup Main Menu, click System BIOS → System Security Settings.
9. In the Intel TXT option, select On.
122
2. TPM connector
4. plastic bolt