Pattern Markers
When Pattern markers are selected, two markers labeled X and O
become available. Pattern markers identify and mark unique bit
patterns in the waveform display. Once the unique bit patterns are
marked, they can be used as reference points or as criteria for a stop
measurement.
The markers are color coded for easy recognition in the waveform
display. The X marker is represented by a vertical green line and the
O marker is represented by a vertical yellow line. In addition each
marker is labeled at the bottom of the display in the Display Location
Reference Line.
When a marker is positioned in the waveform display, it is also
positioned in the chart display and data listing.
See Also
The "Specify Patterns Field" found later in this chapter for more information
on creating a pattern for the X and O markers.
7–13