HP 16550A User Reference page 22

Probing
Preprocessor Target
Number Microprocessor
E2432A 80960CA
E2431A 320C30/31
10342B RS232/HPIB
10342G HPIB
10300B Z80
E2413B 68331/2
E2412A I860XP
E2414B 68302
E2435A I860XR
E2416A MCS96
Recommended Configuration File to Transfer: The recommended configuration file will work the best. If Factory is
recommended, you should use files specifically made for the HP 16550A.
Old Pods to New Pods in a One-Card Module: Pods are reordered respectively.
Old Pods to New Pods in a Two-Card Module: Pods are reordered respectively. Master = M and is located in lower
slot, Expander = E and is located in upper slot.
2–6
Recommended Old Pods to New Pods
Configuration in a One-Card Module
File to Transfer
16511B 1,2,3,4,5,6 to 1,2,5,3,4,6
Factory N/A
Factory N/A
Factory N/A
16510B No Change Required
File E68332_6 1,2,3,4,5,6 to 3,5,1,2,4,6
16540A,D N/A
16540A,D 1,2,3,4,5,6 to 3,5,1,2,4,6
16511B or N/A
16540A,D
16510B No Change Required
Old Pods to New Pods
in a Two-Card Module
1,2,3,4,5,6,7 to
M1,M2,M5,M3,M4,M6,E1
N/A
N/A
N/A
N/A
N/A
1,2,3,4,5,6,7,8,9 to
M1,M2,M3,M4,M5,M6,E2,
E3,E1
N/A
1,2,3,4,5,6,7 to
M3,M1,M2,M4,M5,M6,E1
N/A