Markers / Range Field - HP 16550A User Reference

The Chart Menu

Markers / Range Field

Markers / Range Field
The Marker/Range field is a toggle field that switches between Markers and
Range when it is selected. If the field is set to Range, x and y range fields
become available to set the chart minimum and maximum range points. The
Ymin and Ymax fields display the numeric value of the selected label. The
numeric base of the label value is whatever was previously set.
When the Marker/Range field is toggled to Markers, a marker selection menu
appears with marker choices available with the present analyzer
configuration.
In a state analyzer with Time and State count turned off in the Trigger menu,
only Pattern markers are available. With Time count turned on, additional
choices of Time markers and Statistics markers become available.
With States count turned on, in addition to Pattern markers, States markers
are available.
Off
The Off selection turns marker operations off. If a Stop measurement was
previously specified, and the Stop measurement criteria are met, the
measurement will stop even though the markers are off.
Markers / Range field
Markers field
Markers / Range Field
8–11