Table of Contents
Advertisement
The Format Menu
Pod Clock Field (State only)
Demultiplex
The Demultiplex mode is used to store two different sets of data that occur at
different times on the same channels. In Demultiplex mode, only one pod of
the pod pair is used, and that pod is selectable. Both the master and slave
clocks are used in the Demultiplex mode. Channels assignments are
displayed as Demux Master and Demux Slave. For easy recognition of the
two sets of data assign slave and master data to separate labels.
Demultiplex mode field
Demultiplex Clocking Mode
4–17
Advertisement
Table of Contents
