The Trigger Menu
Modifying the User-level Macro
Edge Terms 1 and 2 (Timing only)
The two edge terms are only available in the timing analyzer. Edge
terms are assigned either a positive-going, negative-going, or
both-edge type.
Two global Timers
In addition to the resource terms available, there are two global timers
available. Each timer can be started, paused, continued, or stopped,
from any sequence level.
All resource terms and timer terms are listed under a scrollable Terms
field. To view all offscreen terms, select the Terms field, then use the
knob to roll the terms list onscreen.
5–27