Confirming The Terminal Is Commissioned; System Information Page - Hughes HN7000S User Manual

Confirming the terminal is
Chapter 4 • Troubleshooting
26
1037073-0001 Revision A
If you cannot access the System Control Center by clicking on the
shortcut or typing
URL address or location bar, try typing
in the bar and pressing E
Follow these steps to confirm the terminal is commissioned:
commissioned
1. At the System Control Center, click on the System Info
2. Observe the value in the
www.systemcontrolcenter.com
NTER
indicator. The System Information page appears. See
Figure 17.
Figure 17: System Information page
If the numerical site ID appears, the unit is commissioned.
Proceed to the next troubleshooting step.
If
Not Commissioned
commissioned. Contact customer support.
http://192.168.0.1
.
field.
Site ID
appears, the terminal is not
in the