Glossary
SPA
Single Parameter Access, used to view or edit parameters through the available communication
ports.
Span
This is a count value representing the mV signal provided by either the LVDT or Load Cell at
100% design load.
Span Register
This is the number of span calibrations that have been performed since the last master reset.
Test Weight
A calibrated weight which will represent a certain load on the scale.
Totalizer
An incremental counter that records the total of material that has been monitored.
Zero Register
Shows the number of zero calibrations that have been performed since the last master reset.
210
BW500 and BW500/L
Operating Instructions, 12/2016, A5E33482052-AD