Banding In Different Colors Occurs - Canon TX-3000 Online Manual

Banding in different colors occurs

Are paper actually loaded on the printer and the media type selected on the
Check 1
touch screen the same?
Select the correct media type in the touch screen menu when loading paper in the printer.
Loading the Upper Roll on the Printer
Loading Sheets in the Printer
Has the paper feed rate been calibrated properly?
Check 2
Adjust the feed amount.
Adjusting Feed Amount
Print job may have been interrupted while receiving, and therefore not printed
Check 3
at a fast frame rate
Exit other applications and cancel other print jobs.
Is Set priority in the touch screen menu set to Prioritize length accuracy?
Check 4
Setting Set priority to Prioritize print quality and adjusting the feed amount can help.
Adjusting Feed Amount
Check if the print head is in the right position
Check 5
Adjust the print head position.
Automatic Adjustment to Straighten Lines and Colors
Make sure that the print head nozzle is not blocked
Check 6
Print a test pattern to check the nozzles and see if they are clogged.
Checking for Nozzle Clogging
Note
• To automatically check for nozzle blockages after printing, set Auto nozzle check in the touch screen
menu to a setting other than Disable.
To show warnings based on nozzle check results, set Nozzle check error display in the touch screen
menu to Enable.
However, printing may be stopped by warnings if this setting is set to Enable.
Menu Structure
768