Common Settings - Kyocera KM-2560 Service Manual

2H0/2HZ

(2) Common settings

Switching the language for display
Select the language displayed on the touch panel.
1. Press [Change] of Language.
2. Press the key for the language to use.
3. Press [OK].
4. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
5. Turn the main power switch on. Touch panel will be
displayed in the selected language.
Default screen
Select the screen appearing right after start-up (default
screen).
1. Press [Change] of Default Screen.
2. Select the screen to show.
3. Press [OK].
Sound
Set options for buzzer sound during the machine opera-
tions.
1. Press [Next] of Sound and then [Next] of Buzzer.
2. Press [Change] of Volume, Key Confirmation, Job
Finish, Ready, or Warning.
3. Select the buzzer volume level, or other sound
options.
4. Press [Close].
Original/Paper setup
Register additional types and sizes of originals and
paper.
Custom original size setup
Set up frequently-used custom original sizes at maxi-
mum. The custom size options are displayed on the
screen to select original size.
1. Press [Next] of Original/Paper Setup and then
[Next] of Custom Original Size.
2. Press [Change] of Custom 1 to Custom 4 to register
the size.
3. Press [On], and enter X (horizontal) and Y (vertical)
dimensions using the [+]/[-] or numeric keys.
4. Press [OK].
Adding a custom size and media type for paper to
print
Set up four frequently-used custom paper sizes at maxi-
mum. The custom size options are displayed on the
screen to select paper set in the MP tray.
1. Press [Next] of Original/Paper Setup and then
[Next] of Custom Paper Size.
2. Press [Change] of Custom 1 to Custom 4 to register
the size.
3. Press [On], and enter X (horizontal) and Y (vertical)
dimensions using the [+]/[-] or numeric keys.
4. Press [Media Type] to select the type of paper and
press [OK] if necessary.
5. Press [OK].
1-3-84
Paper size and media type setup for cassettes
Select paper size and type of paper for Cassette 1, 2 and
optional paper feeders (Cassette 3 and 4).
1. Press [Next] of Original/Paper Setup, [Next] of Cas-
sette Setting, [Next] of Cassette 1 to Cassette 4 to
register the size, and then [Change] of Paper Size.
2. To detect paper size automatically, press [Auto] and
select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1] or
[Standard Sizes 2] for Paper Size.
3. Press [OK].
4. Press [Change] of Media Type to select type of
paper and press [OK].
Paper size and media type setup for MP tray
Select size and type of paper for MP Tray. Set up fre-
quentlyused size and media type before use.
1. Press [Next] of Original/Paper Setup, [Next] of MP
Tray Setting and then [Change] of Paper Size.
2. To detect paper size automatically, press [Auto] and
select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1],
[Standard Sizes 2], [Others] or [Size Entry] for
Paper Size.
If you select [Size Entry], enter X (horizontal) and
Y (vertical) dimensions using the [+]/[-].
3. Press [OK].
4. Press [Change] of Media Type to select the type of
paper and press [OK].
Paper weight
Select weight for each media type.
1. Press [Next] of Original/Paper Setup and then
[Next] of Media Type Setting.
2. Press [Next] for the media type to change weight.
3. Press [Change] of Media Weight.
4. Select the weight and press [OK].
5. To change the duplex printing settings for Custom 1
(-8), press [Change] of Duplex, select [Prohibit] or
[Permit] and press [OK].
6. To change the name for Custom 1(-8), press
[Change] of Name to enter the name and press
[OK].
Default paper source
Select the default paper source from Cassette 1-4 and
MP tray.
1. Press [Next] of Original/Paper Setup and then
[Change] of Default Paper Source.
2. Select default setting for paper cassette.
3. Press [OK].
Automatic detection of originals
Automatically detect originals of special or non-standard
size.
1. Press [Next] of Original/Paper Setup and then
[Change] of Original Auto Detect.
2. Press [A6] or [Hagaki] of A6/Hagaki.
Press [Off] or [On] of Folio.
Press [Off] or [On] of 11 x 15"
3. Press [OK].