(3) Detaching and refitting the press roller
Follow the procedure below to replace the press roller.
Procedure
1. Remove the fuser unit (see page 1-5-41).
2. Remove four claws and remove the fuser
unit cover.
3. Remove two connectors.
4. Remove four screws.
5. Separate the right fuser frame and left fuser
frame.
Connector
Claw
Connector
Claw
Right fuser frame
Screw
Screw
Claw
Claw
Fuser unit cover
Figure 1-5-83
Screw
Screw
Left fuser frame
Figure 1-5-84
2H0/2HZ-1
1-5-45