Detaching And Refitting The Drum Separation Claws - Kyocera KM-2560 Service Manual

Hide thumbs Also See for KM-2560:

Table of Contents

(3) Detaching and refitting the drum separation claws

Follow the procedure below to replace the drum separation claws.

1. Remove the drum unit (see page 1-5-38).

2. Remove two screws and remove the lower

cleaning seal.

3. Release the inserted parts and remove the

drum separation claws.

4. Replace the drum separation claws and

Install the claws.

5. Refit all the removed parts.

Figure 1-5-70

Drum separation claw

separation claw

Lower cleaning seal

Figure 1-5-71

cleaning seal

Inserted part

cleaning seal