U114 Setting Separation Charger Mode - Kyocera KM-2560 Service Manual

Maintenance
item No.
Setting separation charger mode
U114
Description
Sets the separation charger mode.
Purpose
To change the setting if the fuser offset or carrier leaking occurs.
Method
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Display
MODE
Details on the modes
Display
MODE0
(Value 0)
MODE1
(Value 1)
MODE2
(Value 2)
MODE3
(Value 3)
MODE4
(Value 4)
MODE5
(Value 5)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Separation charger mode
First page Second page
Full page separation Full page separation
turned off turned off
Full page separation Leading edge and
turned off trailing edge separa-
tion turned on
Leading edge and Leading edge and
trailing edge separa- trailing edge separa-
tion turned on tion turned on
Leading edge sepa- Full page separation
ration turned on turned on
Leading edge and Full page separation
trailing edge separa- turned on
tion turned on
Full page separation Full page separation
turned on turned on
Description
Setting range
0 to 5
Specification by design
Countermeasure against thick paper,
offset and carrier leaking
Countermeasure against thick paper,
offset and carrier leaking
Countermeasure against color paper
and back-side offset
Countermeasure against humidity-
optimized paper and offset/smear
Countermeasure against low temper-
ature and low moisture, and faulty
paper separation
Countermeasure against thin paper
and electrostatic discharging
2H0/2HZ
Initial setting
4
1-3-43