Kyocera KM-2560 Service Manual page 122

2H0/2HZ
Zoom
Select the enlarged/reduced default when paper size/
sending size changed after the originals set.
1. Press [Next] of Function Defaults and then
[Change] of Zoom.
2. Press [100%] or [Auto].
3. Press [OK].
File name entry
Set an automatically entered name (default) for jobs.
Additional information such as Date and Time and Job
No. can also be set.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of File Name Entry.
2. Press [File Name] to enter the file name in not more
than 30 characters.
3. Press [OK].
4. Press [Date and Time] to add the date/time to the
job, or press [Job No.] to add the job number to the
job. The added information will be displayed in
Additional Info..
5. Press [OK].
E-mail subject/body
Set the subject and body automatically entered (default
subject and body) when sending the scanned originals by
E-mail.
1. Press [Next] of Function Defaults, cursor down key,
and then [Change] of E-mail Subject/Body.
2. Press [Subject] to enter an E-mail subject not more
than 60 characters.
3. Press [OK].
4. Press [Body] to enter an E-mail body not more than
500 characters.
5. Press [OK].
6. Check if the entries are correct and press [OK].
Border erase default
Set the default border width to be erased.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of Border Erase Default.
2. Press [+] or [-] for the Border and Gutter width to
erase.
3. Press [OK].
Margin default
Set the default margin.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of Margin Default.
2. Press [+] or [-] for the Left/Right and Top/Bottom
width margin.)
3. Press [OK].
Collate/Offset
Set the defaults for Collate/Offset.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of Collate/Offset.
2. Select the defaults.
3. Press [OK].
1-3-86
Auto image rotation
Select the default Auto Image Rotation setting.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of Auto Image Rotation.
2. Press [Off] or [On].
3. Press [OK].
Form overlay (copy)
Select the default form and form density from Form Box
for form overlay for copy jobs.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of Form Overlay (Copy).
2. Press [Select Stored From].
3. Press [+] or [-] to enter the form density.
4. Press [Select Form].
5. Select the form and press [OK].
6. Press [OK].
Form overlay (box)
Select the default form and form density from Custom
Box for form overlay for box print jobs.
1. Press [Next] of Function Defaults, cursor down key
and [Change] of Form Overlay (Box).
2. Press [Select Stored From].
3. Press [+] or [-] to enter the form density.
4. Press [Select Form].
5. Select the Box where the Form is stored and press
[Open].
6. Select the form and press [OK].
7. Press [OK].
EcoPrint
Select the EcoPrint default.
1. Press [Next] of Function Defaults, cursor down key
and then [Change] of EcoPrint.
2. Press [Off] or [On].
3. Press [OK].
PDF/TIFF/JPEG image
Select the default PDF/TIFF/JPEG file quality.
1. Press [Next] of Function Defaults.
Press cursor down key twice and then [Change] of
PDF/TIFF/JPEG Image.
2. Select the default image quality from [1 Low Quality
(High Comp.) to [5 High Quality (Low Comp.)].
3. Press [OK].
High Comp. PDF image
Select the default High Comp.
1. Press [Next] of Function Defaults.
Press cursor down key twice and [Change] of High
Comp. PDF Image.
2. Select the default for [Compression Ratio Priority],
[Standard], or [Quality Priority].
3. Press [OK].
Repeat copying
Select the repeat copy default.
1. Press [Next] of Function Defaults.
Press cursor down key twice and [Change] of
Repeat Copy.
2. Press [Off] or [On].
3. Press [OK].