Deleting User Songs - Yamaha TransAcoustic TA3 Owner's Manual

6
Press Button 3 [Func.] to call up the Function
number in the display.
7
Rotate the [VALUE] control to select "F5.4"
(Copying User Songs).
8
Press Button 3 [Func.] to call up "SAv" in the
display.
The lowest MIDI Song number which has no data in the
USB flash drive is automatically selected as the copy
destination and the number is shown in the display.
NOTE
• To cancel the copying operation, press any button other than Button 3 while the Song number is shown.
• If there is no empty MIDI Song number in the USB flash drive, "FUL" appears on the display and the copying operation cannot
be completed. Delete any unnecessary User Songs (see below), and then execute the copy operation again.
9
Press Button 3 [Func.] again to start copying.
Dashes appear in succession on the display, indicating
that the copy operation is in progress. When the
operation is completed, "End" appears on the display.
NOTICE
While dashes appear on the display in succession, never
turn off the power. Doing so may corrupt the data or damage the internal memory or USB flash drive.

Deleting User Songs

You can delete User Songs saved in the internal memory or the USB flash drive.
NOTE
Songs other than User Songs cannot be deleted.
1
(Only when deleting Songs in a USB flash drive)
Connect a USB flash drive to the [USB TO DEVICE] terminal.
2
Press the Menu button several times until the
[SONG] lamp lights up in orange.
Lights up in orange
TA3 SH3 SC3 Owner's Manual
Function
number
3
35