3
3-1 Performing Setup from WebSetup
Chapter 3:
Setting up the
Fiery X2 using
WebSetup
T
O ACCESS
1. Start WebSetup.
2. Log in as Administrator.
3. Choose Setup from the Server menu.
After you have performed initial Setup (Server, Network and Printer Setup) on the
Control Panel, you can complete or change Setup options using WebSetup via a
TCP/IP connection to the Fiery X2.
See Getting Started for information on WebSetup system requirements.
Performing Setup from WebSetup
You need to reboot the Fiery X2 before your changes take effect. See page 3-21
N
:
OTE
for more information.
S
W
S
:
ETUP FROM
EB
ETUP
Enter the Administrator password if required.