Restarting The Fiery X2 - Fiery X2 Administrator's Manual

3
3-21 Performing Setup from WebSetup

Restarting the Fiery X2

You need to reboot the Fiery X2 before your changes take effect.
T F X2:
O RESTART THE IERY
1. Make sure that the information screen on the Control Panel reads Idle.
If Printing or RIPping appears, the Fiery X2 is processing, and you must wait until the
system finishes and reaches the Idle state.
If the Fiery X2 has just finished processing, wait five seconds after Idle appears before
shutting down.
2. Click the Reboot Server button.