Clear Server - Fiery X2 Administrator's Manual

2
2-48 Setting up the Fiery X2
Change Password

Clear Server

Setup
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
and numbers up to 19 characters. Choose
down the password. The only way to remove a password that you can't remember is to
reinstall system software.
Verify New Password
Enter the new password again exactly as before to verify that you have entered it
correctly. If you make a mistake, you are prompted to enter the password again. The
new password is effective after you save changes and reboot the Fiery X2.
Clear Server
Clear Server enables you to clear all queued print jobs from the server—jobs in the
Fiery X2 Print, Hold, and Printed queues. Clear Server also clears the Job Log. If you
keep Job Logs, print or export the Job Log before you choose
Jobs can also be deleted, individually or as a group, from the Fiery WebSpooler.
Scroll to the third screen of the main Setup menu to choose
Choose Clear Server to clear all queued print jobs and the Job Log from the server.
You are asked to confirm your selection.
Exit Setup
Choose Exit Setup from the first screen of the main Setup menu when you have
finished making Setup changes.
The Fiery X2 reboots and any changes you saved during the Setup take effect.
Printing the Configuration page from the Control Panel
The Configuration page lists all the settings in effect from the current Setup. After you
have finished running Setup, print a Configuration page to confirm your settings.
There are other pages you can print from the Control Panel of the Fiery X2, including
Test Page, Job Log, Control Panel Map, color charts, and font list. For information on
these pages, see the User Guide.
OK when you are done. Be sure to write
Clear Server
Clear Server
.
.