Setting Up Netware Windows Clients For Printing - Fiery X2 Administrator's Manual

4
4-16 Setting up Network Servers

Setting up NetWare Windows clients for printing

Before setting up client workstations for printing, make sure you perform Network
Setup on the Fiery X2 Control Panel (see page 2-10), and that the settings reflect the
entities you created in the NetWare administrator utilities (see page 4-4).
For printing to the Fiery X2, connect all Windows clients to a Novell NetWare
N :
OTE
server and permit them to connect to the server or servers on which you defined a
Fiery X2 queue.
After the Novell server and the Fiery X2 have been set up, client setup
consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 95 workstations, both the IPX/SPX-compatible protocol and the
Client for NetWare Networks should be loaded from the Network Control Panel.
On Windows 3.1x workstations, the NetWare shell should be installed.
On Windows NT 4.0 workstations, Client Services for NetWare should be installed.
Use the CSNW option in Control Panel to set printing options and specify a pre-
ferred NetWare server.
• Setting up the Fiery X2 as a PostScript printer by installing a PostScript printer
driver and the Fiery X2 PPD (PostScript printer description).
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the Fiery X2.
See Getting Started for details on how to connect Windows 3.1x, Windows 95, and
Windows NT 4.0 workstations.
• Installing other optional client software, such as color reference files.
See Getting Started for details.