Service Setup Options - Fiery X2 Administrator's Manual

2
2-21 Network Setup options
Exit Service Setup
LPD Setup
PServer Setup
Windows Setup
Service Setup
Web Services Setup
Service Setup

Service Setup options

Network Service Setup has options for TCP/IP and IPX/SPX networks.
• LPD Setup enables lpd printing on TCP/IP networks.
• For IPX/SPX networks, PServer Setup allows you to enter the names of the Novell
objects that are concerned with Fiery X2 print jobs.
• Windows Setup enables the Microsoft SMB (Server Message Block) protocol, which
supports peer-to-peer printing, also known as Windows printing or SMB printing.
• Web Services Setup enables the http protocol and, therefore, use of the
Fiery WebTools.
PServer is a program in the Fiery X2 that can service the Novell print queues assigned
to the Novell print servers you have set up for printing to the Fiery X2. When you
choose PServer Setup and enable PServer, you can set up NDS (Novell Directory Ser-
vices), Bindery Services, or both. NDS is used with NetWare 4.x; Bindery Services are
used with NetWare 3.x or with NetWare 4.x in bindery emulation mode.
Due to the number of options involved, PServer Setup is discussed last in this
N :
OTE
section, after Web Services Setup.