Postscript Setup Options - Fiery X2 Administrator's Manual

2
2-38 Setting up the Fiery X2

PostScript Setup options

PS (PostScript) Setup options allow you to set defaults for both the Fiery X2 and the
copier. Most of these defaults can be overridden on a job-by-job basis. See the User
Guide for more information.
T P S S
O ACCESS OST CRIPT ETUP OPTIONS
1. In the main Setup menu, choose PS Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
In the list of options that follows, default values, where applicable, appear in square
brackets.
Color Mode
CMYK/Grayscale [CMYK]
Specify whether you will be printing color (
by default.
CMYK
forming calibration on the Fiery X2.
Compression
On/Off [On]
Select to enable compression, so that jobs are printed at high quality but with
On
greatly reduced memory requirements. Select
Page Order
Forward/Reverse [
prints pages in the order received, so that the output is stacked from last page
Forward
to first.
Reverse
to last. Reverse order requires compression, so this option only appears if Compression
is set to On. If Compression if Off, output will be stacked in forward order.
Default Paper Sizes
US/Metric [US]
Specify whether to print on
paper sizes (for example, A4, A3) by default. When no page size is defined within a
PostScript file, jobs are printed on Letter paper if you selected US, or A4 paper if you
selected Metric.
:
gives you full color prints. Select
Grayscale
Forward ]
prints jobs in reverse order, so that the output is stacked from first page
paper sizes (for example, letter, legal, tabloid), or
US
) or images to the Fiery X2
CMYK Grayscale
as the Color Mode before per-
CMYK
converts all colors into shades of gray.
to disable this feature.
Off
Metric