Setting Up Another Printer - Fiery X2 Administrator's Manual

4
4-23 Configuring Windows NT 4.0 clients

Setting up another printer

If more than one Fiery X2 printing connection is published (for example, if both the
Print queue and the Hold queue are published), you may wish to create a printer for
each printing connection so that you and other users can print to each queue directly.
T
O SET UP ANOTHER PRINTER WITH
1. Click Start>Settings>Printers to open the Printers window, and then double-click Add
Printer.
2. Using the instructions in "Setting up printing with Windows NT 4.0" in Getting
Started, install another copy of the Fiery X2 printer files.
When prompted to specify the printer name, you may want to enter a name that indi-
cates the printer's queue.
3. Follow the instructions in "Completing the Windows NT 4.0 printer connection" in
Getting Started to set up the new printer for TCP/IP and lpd printing.
In the first line of the Add LPR compatible printer dialog box, enter the same IP
address or host name used for the first printer.
In the second line of the Add LPR compatible printer dialog box, enter either
, depending on the queue to be used. The queue name is case-sensitive; be sure to
print
enter it in all lowercase.
Configuring Windows NT 4.0 clients
Each client of a Windows NT 4.0 server is already using a network protocol to
communicate with the server. Each client can print to the Fiery X2 if it has been shared
by a Windows NT 4.0 Server or Windows NT 4.0 Workstation computer. In that case
the client does not have to use the same network protocol to connect to the
Windows NT 4.0 server as the server uses to communicate with the Fiery X2.
W NT 4.0:
INDOWS
or
hold