Displaying The Traffic Statistics; Checking The Usage Of The Queue; Clearing The Traffic Statistics - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS

2.5.1 Displaying the Traffic Statistics

If the traffic statistics action is configured, you can run display commands to view the traffic
statistics.
Context
To view the flow-based traffic statistics, a traffic policy must exist and contain the traffic
statistics action.
Procedure
l
l
----End

2.5.2 Checking the Usage of the Queue

You can use display commands to view the Usage of the Queue.
Context
To obtain the usage of queues, you can run the following command in any view.
Procedure
l
----End

2.5.3 Clearing the Traffic Statistics

You can use the reset commands to clear the traffic statistics.
Context
The traffic statistics cannot be restored after being cleared. Exercise caution when you run the
command.
Procedure
l
Issue 01 (2012-03-15)
Run the display traffic policy statistics { global [ slot slot-id ] | interface interface-type
interface-number | vlan vlan-id } { inbound | outbound } [ verbose { classifier-base |
rule-base } [ class classifier-name ] ] command to check the flow-based traffic statistics.
Run the display qos queue statistics interface interface-type interface-number command
to check the queue-based traffic statistics on the interface
Run the display qos queue length interface interface-type interface-number command to
view the usage of priority queues on the interface.
CAUTION
Run the reset traffic policy statistics { global [ slot slot-id ] | interface interface-type
interface-number | vlan vlan-id } { inbound | outbound } command to clear the flow-
based traffic statistics.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Traffic Policing and Traffic Shaping Configuration
67