Huawei S3700HI Configuration Manual - Qos page 27

S3700HI Ethernet Switches
Configuration Guide - QoS
l Run:
l Run:
l Run:
----End
Configuring the Redirection Action
The redirection action redirects packets matching the traffic classification rule to the CPU, the
specified interface, the specified next hop address.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic behavior behavior-name
A traffic behavior is created and the traffic behavior view is displayed.
Step 3 Run the following commands as required.
l Run:
Issue 01 (2012-03-15)
NOTE
In a traffic behavior, the remark destination-mac command cannot be used with the following commands
simultaneously:
l redirect ip-nexthop
l redirect ip-multihop
remark dscp { dscp-name | dscp-value }
The DSCP priority of the packets matching the traffic classification is re-marked.
remark local-precedence { local-precedence-name | local-precedence-value }
[ color ]
The local priority of the packets matching the traffic classification is re-marked.
In a traffic behavior, the remark 8021p command and the remark local-precedence
command cannot be used together.
remark ip-precedence ip-precedence
The ip priority of the packets matching the traffic classification is re-marked.
NOTE
The DSCP value and IP precedence of packets cannot be re-marked at the same time.
redirect cpu
The packets matching the traffic classification are redirected to the CPU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Class-based QoS Configuration
20