Clearing The Queue-Based Statistics; Configuration Examples; Example For Configuring Congestion Avoidance And Congestion Management On The S3700Hi - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS
Procedure
l
l
----End

3.4.2 Clearing the Queue-based Statistics

You can use the reset command to clear the queue-based traffic statistics.
Context
To re-collect the queue-based statistics on an interface, you can use the following command in
the user view to clear the previous statistics.
The queue-based statistics cannot be restored after you clear them. So, confirm the action before
you use the command.
Procedure
l
----End

3.5 Configuration Examples

This section provides several configuration examples of congestion avoidance and congestion
management.
3.5.1 Example for Configuring Congestion Avoidance and
Congestion Management on the S3700HI
After congestion avoidance and congestion management are configured, the S3700 provides
different services for packets of different priorities and ensures high-priority and low-delay
services.
Issue 01 (2012-03-15)
Run the following commands to view the queue-based traffic statistics based on device
model.
– Run the display qos queue statistics interface interface-type interface-number
command on the S3700HI to view the queue-based traffic statistics.
Run the display qos port statistics interface interface-type interface-number command
to view the queue-based statistics.
NOTE
Before viewing the queue statistics on an interface, run the qos port statistics enable command to
enable the queue statistics function on the specified outbound interface.
The display qos port statistics command cannot be used on the S3700HI.
CAUTION
Run the reset qos queue statistics interface interface-type interface-number command to
clear the queue-based traffic statistics on the interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Congestion Avoidance and Congestion Management
Configuration
96