Table of Contents
Advertisement
S3700HI Ethernet Switches
Configuration Guide - QoS
l
Issue 01 (2012-03-15)
NOTE
The basic-acl-number parameter specifies the number of a basic ACL. The value is an integer
that ranges from 2000 to 2999.
3.
(Optional) Run:
step step-value
The step value between ACL rule IDs is set.
4.
Run:
rule [ rule-id ] { deny | permit } [ fragment |
ipv6-address prefix-length | source-ipv6-address/prefix-length |
ipv6-address postfix postfix-length | any } | time-range time-name ]
A basic ACL4 rule is created.
Or, run:
rule [ rule-id ] { deny | permit } [ fragment |
ipv6-address prefix-length | source-ipv6-address/prefix-length |
ipv6-address postfix postfix-length | any } | time-range time-name ]
A basic ACL6 rule is created.
5.
Run:
quit
Return to the system view.
6.
Run:
traffic classifier classifier-name [ operator { and | or } ]
A traffic classifier is created and the traffic classifier view is displayed.
The and parameter indicates that the relationship between rules in a traffic classifier
is AND. That is, packets match a traffic classifier only when the packets match all
non-ACL rules and an ACL rule in the traffic classifier. The or parameter indicates
that the relationship between rules in a traffic classifier is OR. That is, packets match
a traffic classifier when the packets match a rule in the traffic classifier.
By default, the relationship between rules in a traffic classifier is AND.
7.
Run:
if-match acl basic-acl-number
A traffic classifier based on a basic ACL is created.
Creating a traffic classifier based on an advanced ACL
1.
Run:
system-view
The system view is displayed.
2.
Run:
:acl advance-acl-number
A advance ACL is created and the ACL view is displayed.
Or, run:
acl [ ipv6 ] name acl-name link
A named ACL is created and ACL view is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Class-based QoS Configuration
logging | source {
source-
logging | source {
source-
source-
*
source-
*
14
Advertisement
Table of Contents
