Configuration Examples; Example For Configuring Traffic Policing Based On An Interface - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS
l
----End

2.6 Configuration Examples

This section provides several configuration examples of traffic policing and traffic shaping.
2.6.1 Example for Configuring Traffic Policing Based on an
Interface
You can configure interface-based traffic policing so that the Switch can provide different
bandwidth services for users.
Networking Requirements
As shown in
branch 2 of the enterprise are connected to the Switch through Eth 0/0/1 and Eth 0/0/2 and access
the network through the Switch and router. Branch 1 and branch 2 of the enterprise require 8
Mbit/s and 5 Mbit/s bandwidth.
Figure 2-3 Networking diagram of traffic policing
branch 1 of
the enterprise
Configuration Roadmap
The configuration roadmap is as follows:
Issue 01 (2012-03-15)
Run the reset qos queue statistics interface interface-type interface-number command on
the S3700HI to clear the queue-based traffic statistics on the interface.
Figure 2-3, the Switch is connected to GE 0/0/1 through the router; branch 1 and
Core network
Router
Eth0/0/1
LSW1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Traffic Policing and Traffic Shaping Configuration
GE0/0/1
Eth0/0/2
Switch
LSW2
branch 2 of
the enterprise
68