Checking The Configuration - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS
l
----End

1.4.6 Checking the Configuration

After a traffic policy based on complex traffic classification is configured, you can view the
configuration of the traffic classifier, traffic behavior, and traffic policy.
Prerequisites
The configurations of the traffic policy based on complex traffic classification are complete.
Procedure
l
l
l
l
l
Issue 01 (2012-03-15)
After a traffic policy is applied, the system performs traffic policing for the packets
that pass through this interface and match traffic classification rules in the inbound or
outbound direction.
NOTE
It is recommended that you should not use the traffic policy containing the re-marking of the
802.p priority, the inner VLAN tag of QinQ packets, and the VLAN ID of packets in a VLAN
on the untagged interface in the outbound direction; otherwise, the information carried in the
packets may be incorrect.
Applying a traffic policy to a VLAN
1. Run:
system-view
The system view is displayed.
2. Run:
vlan vlan-id
The VLAN view is displayed.
3. Run:
traffic-policy policy-name { inbound | outbound }
A traffic policy is applied to the VLAN in the inbound or outbound direction.
Only one traffic policy can be applied to a VLAN in the inbound or outbound direction.
After a traffic policy is applied, the system performs traffic policing for the packets
that belong to a VLAN and match traffic classification rules in the inbound or
outbound direction.
Run the display acl { acl-number | all } command to check the ACL rules.
Run the display traffic-applied [ interface [ interface-type interface-number ] | vlan
[ vlan-id ] ] { inbound | outbound } [ verbose ] command to check information about
traffic actions and ACL rules associated with a device, a VLAN, or an interface.
Run the display traffic classifier user-defined [ classifier-name ] command to check the
traffic classifier on the S3700.
Run the display traffic behavior user-defined [ behavior-name ] command to check the
traffic behavior configuration.
Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ]
command to check the traffic policy information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Class-based QoS Configuration
26