Huawei S3700HI Configuration Manual - Qos page 29

S3700HI Ethernet Switches
Configuration Guide - QoS
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic behavior behavior-name
A traffic behavior is created and the traffic behavior view is displayed.
Step 3 Run:
car cir cir-value [ pir pir-value ] [ cbs cbs-value pbs pbs-value ] [ green
{ discard | pass [ remark-dscp dscp-value | remark-8021p 8021p-precedence ] } ]
[ yellow { discard | pass [ remark-dscp dscp-value | remark-8021p 8021p-
precedence ] } ] [ red { discard | pass [ remark-dscp dscp-value | remark-8021p
8021p-precedence ] } ]
The CAR action is configured.
Step 4 (Optional) Run:
car car-name share
The aggregate CAR action is configured.
----End
Configuring Flow Mirroring
The flow mirroring action mirrors all the packets matching traffic classification rules to the
observing interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic behavior behavior-name
A traffic behavior is created and the traffic behavior view is displayed.
Step 3 Run:
mirroring to observe-port index
All the flows that match a traffic classifier are mirrored to an observing interface.
----End
Issue 01 (2012-03-15)
NOTE
Before configuring aggregate CAR, run the qos car command to configure a CAR profile.
NOTE
For details about flow mirroring, see Configuring Local Flow Mirroring in the S3700HI Ethernet Switches
Configuration Guide - Device Management.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Class-based QoS Configuration
22