Troubleshooting And Diagnostic Information; Troubleshooting Indicators - Oracle SUN X4-8 Service Manual

Troubleshoot Hardware Faults
Note -
the service procedure for the component for more information.

Troubleshooting and Diagnostic Information

The following table lists diagnostic- and troubleshooting-related procedures and references that
can assist you with resolving server issues.
Description
Diagnostic information for the x86 servers,
including procedures for performing runtime
and firmware-based tests, using Oracle
ILOM, and running U-Boot and Pc-Check
to exercise the system and isolate subtle and
intermittent hardware-related problems.
Administrative information for the Oracle
Sun Server X4 series servers, including
information about how to use Oracle System
Assistant and using the Oracle ILOM system
event log (SEL) to identify a problem's
possible source.

Troubleshooting Indicators

The eight indicators on the server front panel show the state of the server. For more information
about indicator locations, see
Indicator Panel" on page
The following sections describe the status of the front panel indicators for various server states:
Note -
depends on presence of redundant components and the severity of the fault.
"Server Boot Process and Normal Operating State Indicators" on page 59
■
"Locate Indicator On" on page 60
■
"Over Temperature Condition" on page 60
■
58 Sun Server X4-8 Service Manual • December 2015
After servicing the component, you might need to clear the fault in Oracle ILOM. Refer
"Front Indicator Module (FIM) Panel" on page 34
40.
For the error state scenarios described below, the state of the Power OK indicator
Link
http://docs.oracle.com/cd/E23161_01/index.html
Oracle X4 Series Servers Administration Guide
and "Back