Use this procedure to replace or reset a DIMM.
For component serviceability, locations, and designations, see
Before You Begin
■
Locations, and Designations" on page
Use Oracle ILOM to identify the location of the failed DIMM and obtain CMOD
■
designation information.
For an overview video about replacing a failed DIMM, see
Tip -
1.
Prepare the server for warm or cold service.
For servers equipped with SW 1.0 and with versions of Oracle ILOM older than 3.2.4.18,
■
use cold service. See
For servers equipped with SW 1.1 and with Oracle ILOM 3.2.4.18 or newer, use
■
cold service or warm service. For warm service, see
Service" on page
Remove the CMOD that contains the failed DIMM. See
2.
CMOD" on page
3.
To remove the CMOD top cover, push the release button, slide the cover away
from the front of the CMOD, and lift it off the CMOD.
Caution -
discharge. Wear a wrist strap and use an anti-static wrist mat.
"Prepare the Server for Cold Service" on page
96.
133.
Component damage. CMOD components are extremely sensitive to electrostatic
"Component Serviceability,
79.
Replacing
"Prepare the Server for Warm
"Remove a
Replace a Failed DIMM
DIMMs.
99.
Servicing Components
143