Oracle SUN X4-8 Service Manual page 206

Install the HBA Card
1. Position the HBA card with the component side facing upward and the edge
connector pointed away from you.
With the SMOD positioned upside down and the back (connector) side facing
2.
you, orient the HBA card in the opening on the right.
3. Ensure that the two backplane cables are routed under the support bracket on
the bottom of the SMOD.
4. Connect the cables to the connectors on the HBA card.
5. Lower the card and align its edge connector with the PCIe slot on the SMOD
motherboard.
206 Sun Server X4-8 Service Manual • December 2015