Oracle SUN X4-8 Service Manual page 97

For more information about component serviceability, see
Requirements" on page
Caution -
or with any version of Oracle ILOM earlier than Oracle ILOM 3.2.4.18.
Caution -
CMODs and their subcomponents while the server is in warm service mode.
Caution -
is in full power mode. This action removes power from the CMODs and causes an immediate
shutdown. On an eight-CMOD system, this applies to all fan modules. On a four-CMOD
system, this applies to the fan modules in the left-hand fan frame (CMODs 0-3).
Important: Review the
■
Before You Begin
before performing removal and installation procedures.
1. To power down the host and activate the front panel Locator indicator, do the
following:
Note -
ILOM 3.2.18 or newer.
Log in to the Oracle ILOM web interface.
a.
Direct a web browser to Oracle ILOM using the IP address of the server SP and log in as
root or a as user with administrator privileges. See
Series Servers Administration
b. In the Actions section of the Summary screen, click the Power State Turn Off
button.
79.
Equipment damage. Do not perform warm service on servers equipped with SW 1.0,
Loss of service or component damage. Do not replace any components except for
Data Loss. Do not remove more than one fan module from a column while the system
Sun Server X4-8 Product Notes
Warm service can only be performed on systems equipped with SW1.1 and Oracle
"Component Serviceability
"Accessing Oracle ILOM" in Oracle X4
Guide.
Prepare the Server for Warm Service
for hardware-related information
Preparing for Service 97