Oracle SUN X4-8 Service Manual page 196

Remove the SMOD
Access this component directly from the rear of the server.
For component serviceability, locations, and designations, see
Before You Begin ■
Locations, and Designations" on page
Obtain labels and a pen for labeling cables.
■
1. Prepare the server for cold service. See
Service" on page
2. Label and disconnect all cables from the SMOD.
Disengage the SMOD from the server midplane.
3.
a. To unlock the SMOD handles, squeeze together the release latches on the
end of both handles.
The unlocking action is accompanied by an audible click.
196 Sun Server X4-8 Service Manual • December 2015
79.
99.
"Component Serviceability,
"Prepare the Server for Cold