Specifications; Use - TESTO 330 Instruction Manual

3
3.1.
d Quality Products Online at:

Specifications

Use

The testo 330 is a handheld measuring device for the professional
flue gas analysis of furnace systems:
• Small furnaces (burning oil, gas, wood, coal)
• Low-temperature and condensing boilers
• Gas water heaters
These systems can be adjusted using the testo 330 and checked
for compliance with the applicable limit values.
The following tasks can also be carried out with the testo 330:
• Regulating the O2-, CO- and CO2-, NO-, NOx- values in
furnace systems for the purpose of ensuring optimal operation.
• Draught measurement.
• Measuring and regulating the gas flow pressure in gas water
heaters.
• Measuring and optimising the flow and return temperatures of
heating systems.
• CO and CO2 environment measurement.
• Detection of CH4 (methane) and C3H8 (propane).
• The testo 330 can be used for measurements on CHPs in
accordance with the first German Federal Immission Control
Act.
• The NOx filter of the CO measuring cell has a service life of
4.5 years at an average 50 measurements per year. (50 %
diesel CHP / 50 % gas CHP)
• If you should carry out more than 50 measurements per
year, please contact your nearest Testo service centre or
the sales representative responsible.
testo 330 must not be used:
• as a safety (alarm) instrument
®
The Bluetooth option may only be operated in countries in which it
is type approved.
GlobalTestSupply
www.
3 Specifications
9
.com
sales@GlobalTestSupply.c