Keysight N5264A Service Manual page 23

General Product Information
Required Service Test Equipment
a
Equipment
1 inch, open-end torque wrench
(metric equivalent is 26 mm)
20 mm, open-end torque wrench
Static Safety Parts
Adjustable antistatic wrist strap
Antistatic wrist strap grounding cord
(5 foot)
Static control table mat and earth
ground wire
Miscellaneous
USB flash ROM drive
a. Unless specified otherwise, equipment listed is required for all measurement receiver options.
b. P = Performance tests, A = Adjustments, T = Troubleshooting, R = Repair, V = System verification
Keysight N5264A Service Guide
Critical Specifications
8.1 N-m (72 in-lb) setting (for
Port 1 and Port 2 connector
nuts)
0.9 N-m (8 in-lb) setting (for
measurement port
connections)
N/A
N/A
N/A
N/A
Recommended Al ternate
Model or Part Model
Number Number
N/A N/A
8710-1764 N/A
9300-1367 None
9300-0980 None
9300-0797 None
Any None
b
Use
R
P, A, T
P, A, T
P, A, T
P, A, T
P, A, R
2-7