Keysight N5264A Service Manual page 22

General Product Information
Required Service Test Equipment
a
Equipment
3.5 mm verification kit
Cables
BNC cable (2 required)
3.5 mm RF cable (Qty 2)
GPIB cable
Adapters
3.5 mm (f) to 3.5 mm (f)
3.5 mm (f) to type-N (m)
Attenuators
3.5 mm (m,f), 10-dB fixed
attenuator
3.5 mm (m,f), 20-dB fixed
attenuator
a. Unless specified otherwise, equipment listed is required for all measurement receiver options.
b. P = Performance tests, A = Adjustments, T = Troubleshooting, R = Repair, V = System verification
c. Included in the 85052B/D calibration kits.
Required Service Test Equipment (Cont'd)
a
Equipment
Tools
T-8 TORX driver
T-10 TORX driver
T-15 TORX driver
T-20 TORX driver
1/4 inch and 5/16 inch open-end
wrench
5/16 inch, open-end torque wrench
(metric equivalent is 8 mm)
2-6
Critical Specifications
Freq: 10 MHz to 26.5 GHz
50 , length  60 cm
50 , length  60 cm
N/A
Return Loss:  32 dB
Return Loss:  28 dB
Accuracy: ± 0.5 dB
Freq: 10 MHz to 26.5 GHz
Accuracy: ± 0.5 dB
Freq: 10 MHz to 26.5 GHz
Critical Specifications
0.6 N-m (5 in-lb) setting
0.5, 0.8, and 1.0 N-m
(4, 7, and 9 in-lb) settings
1.5 N-m (14 in-lb) setting
2.4 N-m (21 in-lb) setting
Thin profile
1.1 and 2.4 N-m (10 and 21
in-lb) settings (for semi-rigid
cables)
Recommended Al ternate Model
Model or Part or Part Number
Number
85053B None
8120-1839 None
85131C 85131E
10833A/B/C/D None
83059B
85052-60012
1250-1743 None
8493C None
Option 010
8493C None
Option 020
Recommended
Model or Part
Number
N/A
N/A
N/A
N/A
8710-0510
N/A
Keysight N5264A Service Guide
b
Use
V
A
P,A,V
P,A
P,A,T
c
P,A,T
P
P
Al ternate
b
Use
Model
Number
N/A R
N/A T, R
N/A T, R
N/A T, R
N/A A, R
N/A T, R