Terminal - Eiki EK-510U Owner's Manual

Name and function of your projector

Terminal

2
1
9
17
USB
When using the Memory Viewer function, insert
the USB memory directly to this terminal.
VIDEO IN
Connect video output signal to this terminal.
S-VIDEO IN
Connect S-VIDEO output signal of video device to
this terminal.
VGA IN
Connect output signal from computer to this
terminal.
MONITOR OUT
Transmit signals from
your projector is acting as a display output.
R(PR)/G(Y)/B(PB)/H(HV)/V
– Connect RGBHV format (5-core) signals to
R/G/B/HS/VS terminal respectively.
– Connect component signals to Y, Pb, Pr termi-
nal respectively.
HDMI
Connect HDMI digital output signals or MHL
digital output signals to this terminal.
Micro-USB
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
AUDIO (Video)
Connect audio signal from
AUDIO (S-Video)
Connect audio signal from
16
3 4 5
10
11 12
to other displays when
to this terminal
to this terminal.
6
7
13 14 15
AUDIO IN1/AUDIO IN2
– Connect audio signals for device
AUDIO IN1
– Connect audio signals for device
AUDIO IN2
AUDIO OUT
Output audio signals to amplifier or other audio
equipment.
RS232C
Connect serial cable to this terminal when using
RS232 device to control or operate your projector.
R/C IN
Connect wired remote controller to this terminal.
Connection of a wired remote controller will dis-
able the wireless one.
R/C OUT
Transmit wired remote controller signals of
another projector when a wired remote controller
is used.
HDBaseT
(for EK-510U, 510UL, 501W, 501WL)
When the projector is equipped with HD-Ba-
seT function, connect to this terminal through a
network cable to achieve the function as for it is
optional.
LAN
(for EK-512X, 512XL)
Connect network cable to this port for controlling
and operating your projector via network.
Power cord connector
Anti-theft slot
8
16
18
to
to
to