Input Selection; Input Select - Eiki EK-510U Owner's Manual

Input select

Direct Operation
Press HDMI, VGA, VIDEO, HDBase T,
COMPONENT, RGBHV or S-VIDEO on the
remote control as input source.
Menu operation
1 Press INPUT button on the remote control or
control panel to display the input select menu.
2 Press  button to select VGA, RGBHV,
HDMI 1, HDMI 2(MHL), HDBaseT,
Component, Video, S-video, Memory Viewer,
Network or USB Display, then press the OK
button.
When input source is from computer
VGA
connected to VGA terminal with VGA
cable, please select "VGA".
When input source is from computer
RGBHV
equipment connected to BNC termi-
nal with BNC*5 cable, please select
RGBHV..
When input source is from equip-
HDMI 1
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 1".
When input source is from equip-
HDMI 2(MHL)
ment connected to HDMI terminal
with HDMI cable, please select
"HDMI 2".
When input source is from equip-
HDBase T
ment connected to HDBaseT termi-
nal with RJ45 cable, please select
"HDBaseT".
*This function is not available for EK-512X
Select it when the input source is
Component
from the video equipment connected
to YPbPr terminal.
Select it when the video input signal
Video
is connected to VIDEO IN terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal will
be searched automatically.

Input selection

Remote control
COMPONENT
Control Panel
Input select menu
VGA
HDMI
HDBase T
PATTERN
INPUT
VOL-
VGA
RGBHV
HDMI 1
HDMI 2(MHL)
HDBase T
Component
Video
S-video
Memory Viewer
Network
USB Display
VIDEO
RGBHV
S-VIDEO
INPUT
VIDEO S-VIDEO AUDIO AUDIO
VOL+
IN1 OUT
360.2
35
VGA
IN
P/PR G
MONITOR OUT
AUDIO
IN2