Zoom / Focus Function; Lens Shift Function; Auto Setup Function - Eiki EK-510U Owner's Manual

ZOOM/FOCUS

Zoom / focus function

1. Press the ZOOM / FOCUS button on the
rear control panel or remote controller for
zooming and focusing.
2. Press button to zoom in and out.
Press button to change focus of
image. Default adjustment speed is set to
FAST. You may press the ENTER button,
select STEP for speed fine-tuning.

Lens Shift function

1. Press the LENS SHIFT on the rear control
panel or remote controller to adjust posi-
tion of the lens. Default adjustment speed
is set to FAST. You may press the ENTER
button, select STEP for speed fine-tuning.
2. Movement of the lens is shown on the
screen. Press
screen to required location without any
image distortion. Range of screen move-
ment - Upward or downward from the lens
movement axis: 70%(WXGA), 60%(XGA /
WUXGA). Leftward or rightward: 30%.
3. Press and hold the LENS SHIFT button on
the rear control panel or remote controller
for 5 seconds to home it to the center
position.

Auto setup function

Press the AUTO button on your remote con-
troller to auto execute settings given in the
Auto Setup menu (including Auto Searching,
Auto PC Adjusting and Auto Keystone).
30
Basic operation
VIDEO
VOL- VOL+
LENS SHIFT
button to move the
VGA
IN
P/PR G/Y B/PB
Auto setup
MONITOR OUT
S-VIDEO AUDIO AUDIO AUDIO RS-232C
IN1 OUT IN2
FOCUS
LENS SHIFT
360.2
Zoom / focus
Lens shift
Note:
The arrow mark displays in black when
the lens is not moved. It turns red once
the lens is moved for adjustment.
Expend
Input search
Auto PC adj.
Auto keystone
DVI-D
H/HV V
R/C R/C AUDIO
IN OUT
Auto setup
Expend
Input search
Auto PC adj.
Auto keystone
ZOOM
Auto setup